How to add Equations and Chemical Reactions in Google Doc using MathType...

-

Comments

Post a Comment

Popular posts from this blog

Ceiling Fan Simulation in a Room Using Ansys Fluent | Adding Fan Boundary Condition in CFD

-
Image
Ceiling Fan Simulation in a Room Using Ansys Fluent | Adding Fan Boundary Condition in CFD Introduction In this tutorial, we will perform a CFD simulation of a ceiling fan inside a room using Ansys Fluent. We will also learn how to add a fan boundary condition to simulate airflow behavior accurately. Step 1: Setting Up the Geometry in Ansys Open Ansys Workbench and create a new Fluid Flow (Fluent) Project . Use SpaceClaim or DesignModeler to create the room and fan geometry. Ensure that the fan blades are modeled properly or import the 3D fan model. Step 2: Meshing the Model Open the Meshing Tool in Ansys. Apply a fine mesh around the fan for better resolution. Use inflation layers near walls for accurate boundary layer calculations. Step 3: Defining the Boundary Conditions Open Ansys Fluent and import the mesh. Set the room walls as no-slip boundaries. Define the fan region and apply the fan boundary condition . Set the inlet velocity and outlet pressure as per simulation r...
Read more

TUTORIAL 03: CFD ANALYSIS OF DATA CENTER USING OPEN FOAM SOFTWARE

-
Image
Title : CFD analysis of data center using open foam software Figure 3.1 (a) Velocity Contour of data center with BCs Figure 3.1 (b) Meshed domain of data center Problem Identification In this problem investigation of data center using OPENFOAM is proposed for heat transfer modeling (data center cooling), in which air is flow in data center from prescribed location section from one inlet condition, which is assumed at surface of left side wall (See the following figure). Air properties are selected from literature available in digital medium. Outlet is at top of the room which is selected for cooling effect of data center system. Some assumptions are applied in this problem like initial room temperature is assumed at constant value for this problem. Air properties are also assumed constant for this problem. “ buoyantBoussinesqPimpleFoam ”  is selected as solver for this problem. Open Foam software is installed on Win 7, provided by FSD blueCAPE Lda: http://bluec...
Read more

FDS-01: SIMPLE FLUID FLOW ANALYSIS USING FDS (FIRE DYNAMICS SIMULATOR) TOOL

-
Image
FDS-01: SIMPLE FLUID FLOW ANALYSIS USING FDS (FIRE DYNAMICS SIMULATOR) TOOL In this tutorial a window is created which is treated as inflow of air with velocity of 2.5 m/s having temperature of 5 C. The outflow conditions is treated at top of the office, and the boundary condition is set as open to atmosphere  The steps are followed in this tutorial are listed below::   Step I: create header syntax file to start program in FDS software.   &HEAD CHID='office'/ Note: office is user defined name of FDS function/ file.   Step II: create syntax for simulation flow time.   &TIME T_END=15.0 Note: 15 sec is simulation flow time, which is solved in FDS software.   Step III: create syntax for initial temperature of domain.   &MISC TMPA=45.0/   Note: 45 C is initial room temperature, which is provided in this tutorial. Following three syntax is must for every FDS function.   Step IV: Create syntax for geom...
Read more